VERMEER CS418 TRUCK MOUNTED CORE DRILL CONCRETE ASPHALT PAVEMENT SAW 18\" BIT For Sale -

VERMEER CS418 TRUCK MOUNTED CORE DRILL CONCRETE ASPHALT PAVEMENT SAW 18\

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

VERMEER CS418 TRUCK MOUNTED CORE DRILL CONCRETE ASPHALT PAVEMENT SAW 18\" BIT:
$3000.00

THIS sale IS FOR A

GREAT RUNNING WORKING

2006 VERMEER CS418 TRUCK MOUNT CORE SAW

UNIT IS IN VERY GOOD CONDITION AND READY TO USE. LOOKS LIKE IT HAS SPENT ITS LIFE JUST SETTING AROUND.

KHOLER 25HP GASENGINETHAT STARTS AND RUNS GREAT

NO LEAKS AND EVERYTHING WORKS OTHER THAN THE LITTLE SCREEN THAT SHOWS THE HOURS AND THE RPM DOES NOT WORK

COMES WITH MANUALS FOR IT

ALSO COMES WITH 200 GALLON WATER TANK SHOWN AND WATER PUMP

CS418 bits from 4-18\"(10-45 cm) wide and up to 24\" (61 cm) deep

Truck-mounted:Length: 96\" (244 cm) (saw unit)Width: 48.75\" (124 cm) (saw unit)Height: 58.4\" (148 cm) (saw unit)Weight (Dry): 1100 lb (498.95 kg) (saw unit)

Rotation motor: 2-speedRotation speed: 0-200 rpm, 0-400 rpmFeed pressure: 0-2500 psiMast vertical travel: 24\" (61 cm)Truck-mounted:Mast offset: 12\" (30 cm) left/right

Rotation control spring return handle w/ flow control valveFeed control detented handle w/ flow control and pressurevalvesTruck-mounted:Mast raise: HydraulicMast tilt: HydraulicFrame slide out: HydraulicMast offset: Hydraulic

The CS418 Core Saw pavement cutting systemfeatures the following:• Saws a variety of pavement materials such as asphalt andconcrete – even concrete reinforced with rebar.• A large range of bit diameter and depths are available totackle a variety of applications.• Can be configured as a truck or trailer unit.• Variable speed and reversible rotation with 2-speed rpmswitch and digital rpm read out allows the rpm to beadjusted to bit diameter for the appropriate tip speed.• A detented feed rate handle with feed rate flow controlvalve and variable feed pressure gives the operator theopportunity to set up the optimum penetration rate withoutthe need for constant feathering of the feed control.• Water is pumped to the saw bit for cooling and lubricationfrom a water supply tank, 12-Volt adjustable flow waterpump, and water swivel to the drive spindle

TRUCK IS NOT INCLUDED IN THIS sale BUT FOR THE RIGHT PRICE COULD BE YOURS :-)

YES I CAN LOAD FOR YOU

PLEASE SEE PICTURES FOR OVERALL CONDITION

OHIO RESIDENTS ARE REQUIRED TO PAY 7.25% SALES TAX UNLESS TAX EXEMPTION DOCUMENTS ARE PROVIDED

EMAIL ME IF YOU NEED A NUMBER OF A GOOD SHIPPER THAT WILL SET IT ALL UP AND HAVE IT TRUCKED SHIPPED TO YOU.

I CHARGE $100 OVER WINNING offer IF YOU NEED THIS STRAPPED ON A PALLET FOR TRUCKING

I GUARANTEE YOUR SATISFACTION!

PLEASE READ ALL OF THE sale TERMS LISTED BELOW.....YOU AGREE TO THEM BY offerDING.

IF IT IS NOT LIKE I SAY IT IS YOU DO NOT HAVE TO BUY WHEN YOU COME TO PICK IT UP, AND I WILL HAVE NO HARD FEELINGS :-)

MUST BE PAID FOR WITH IN 5DAYS FROM END OF sale! WINNER MUST CONTACT ME WITH IN 24 HOURS AFTER THE END OF sale OR I WILL RELIST ITEM.

YOU CAN PAY AT TIME OF PICK UP IF WITH IN THE 5 DAYS

The long term storage of paid for items is causing all of us more and more problems. I can store paid items for up to 30 days and then the item will be disposed of without compensation. If you need more time, contact me prior to the 30th day. Each additional day will be $10.00. I assume no liability for the safety or protection of the item.

When the item is accepted and leaves my possession, whether personally or by carrier, it cannot be returned for refund or adjustment. It is then an as-is sale.

PLEASE MAKE AN APPOINTMENT. DO NOT JUST SHOW UP I MAY NOT BE AROUND THAT DAY!

Or you can arrange for a trucking firm to pick it up. I DO NOT GIVE OUT TRUCKING QUOTES.I CHARGE $100 OVER WINNING offer IF YOU NEED THIS STRAPPED ON A PALLET FOR TRUCKING AND TAKING TO TOWN FOR PICKUP AT A WAREHOUSE.

CAN DELIVER TO YOU FOR AROUND $2.00 A LOADED MILE ZIP CODE TO ZIP CODE MINE IS 43311


Buy Now


Related items