Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Filters
The FL-232 350 Hz filter is a medium-narrow filter for CW and RTTY (and also useful with other narrow digital modes). It is narrower than the FL-100 but wider than the FL-101. It effective isolates signals within its bandwidth and, in the ICOM 706 MKIIG, in conjunction with the IF-filter (and the CW-R and RTTY-R choices), the RF-gain and also the NR DSP filter from the UT-106 unit (set at mid-range) it can significantly obliterate nearby signal and improve reception of week ones. It is also very easy to install as, contrary to the FL-52A or FL-53A optional filters in the ICOM 703, its installation does not require any soldering. The one I purchased was provided in its original package and was clearly brand-new.
Verified purchase: Yes | Condition: New
This is the best choice of the three narrow filters for the IC-706 series transceivers and others that use the 9.106 MHz IF. Why? The 500 Hz FL-100 has a tendency to ring annoyingly. Some people find the FL-101 250Hz filter to be a bit too narrow. Example: you tune in a CW station with the SSB filter switched in and then switch to narrow....and the station is gone. You have to hunt for it. The 350 Hz filter is a nice balance, plus if you're using the ancient digital mode of RTTY, the mark and space tones fit nicely within its bandwidth. You could do this with the 500 Hz filter, but you have the ringing with which to deal. So, I like this one the best of the 3 narrow filters. Put the FL-232 and the 1.9 KHz narrow SSB filter in your '706 with the stock filter and you have a great radio.
Verified purchase: Yes | Condition: New
Nice sharp edges,great ICOM product.Also it plugs in no,solder.
Verified purchase: Yes | Condition: Pre-owned
Excellent quality easy to install
Verified purchase: Yes | Condition: New