Technics SL-1200/1210 ProteX Black Ground Lead Elimination With Tonearm PCB 1.2m For Sale -

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Technics SL-1200/1210 ProteX Black Ground Lead Elimination With Tonearm PCB 1.2m:
$33.20

XteXProteX Black GLE With Tonearm PCB 1.2m

High quality audiocable for Technics SL-1210 & SL-1200 series, Neutrik gold plated RCAplugs and Van Damme XKE UPSPOFC cable with ground lead (earth wire) elimination pre-soldered and assembled to tonearm PCB

*Thisis one kit for a single turntable, if you need two add another to the quantitybox when buying*

Easy install kitwith detailed picture guide

Onevery tough very good quality rugged replacement RCA phono audio cable kit, supplied with step-by-step detailed picture guide for every stageof installation, all that is needed to fit the kit is a small collection of tools (medium+ screwdriver, wire cutters, soldering iron). please email for more info. Please note the ground lead carries inducted noise and radio interferance away from the audio signal into the central earth of the mixer/amplifier. By installing this modification you should be aware that you will pass these unwanted signals, when present into the audio signal path. Users of timecoded vinyl such as serato scratch have reported that this is not a problem with this system.

Neutrik gold plated professional RCA phono plugs, very tough and reliable

Double shielded cable for ultra low noise and high RF rejection operation, the cable has a 80/0.10mm close lap copper screen and an additional carbon thermoplastic inner screen

Ultra Pure Silver Plated Oxygen Free Copper (UPSPOFC) cable with thick 1.5mm PVC/Neoprene insulation and very low capacitance, certified for sub-zero use

Internal section of cable is the same diameter as the original cable making installation easy

Plug solder points are insulated after soldering giving the cable extra reliability and full protection from cable fray shorts

Cables are fully tested after construction using a computer controlled dedicated cable tester that can detect shorts and resistive shorts with an accuracy of 1mS

Detailed installation instructions with picture guide for each step for easy installation and continued maintenance

1.2 metre cable length (other lengths available on request)

Kit Options:

Cable only version (without PCB) also available, please check other items
Other lengths available on request

One ProteX RCAPCB cable replacement
Fully detailed printed instructions with pictures for every step of installation
FREE copy of service manual available on request (will be sent via email)

Soldering iron
Medium posi (+) screwdriver
Small or medium wire cutters

Low capacitance means long lengths can be used with confidence

Low noise and high flexibility for on stage use

Can be used for high quality hi-fi interconnects

Conductor Material: Bare silver plated ultra pure oxygen free copper wire
Stranding: 3 x 0.20mm
Material: Bare ultra pure oxygen free copper wire
Stranding: 4 x 0.20mm AWG 24/7
Insulation Material: Polyethylene
Diameter: 1.65mm ± 0.10
Screen Type 1: Conductive thermoplastic
Type 2: 80 x 0.10mm close lap spiral ultra pure oxygen free copper wire
Diameter: 2.90mm

Conductor84.5 Shield 30.2 Insulation Mohm/km <2500 Capacitance pF/m Core to coren/a Core toshield <98

Overall jacket properties:
Jacket Material: Flexible PVC composite
Overall diameter: 5.80 mm
Bend radius: 15 x overall diameter
Tensile strength: 0.85Kg/mm2
Elongation: >250%
Heat shock: 120 °Cx h no cracks
Temp Range: -10 to +60 degrees C
Cable Weight: kg/km 44kg

Satin Black Metal Body
24K Gold Plated Contact Surfaces
Internal Conical Cable Strain Relief

Contact resistance: < 10 mΩ

Dielectric strength: 0,5 kVdc

Rated current per contact: depends on mated connector

Cable O.D.: ≤ 6 mm

Insertion force: ≤ 20 N

Withdrawal force: > 5 N

Lifetime: 5000 mating cycles

Wire size: 24 AWG

Bushing: steel sp

Contact plating: 0.2 µm Au (Gold)

Contacts: CuZn39Pb3

Insert: PBT

Shell: CuZn39Pb3 Black

Solderability: Complies with IEC 68-2-20

Temperature range: -20 °C to +70 °C

SL-1200MK2 & SL-1210MK2
SL-1200MK3 & SL-1210MK3
SL-1200M3D & SL-1210M3D
SL-1200MK4 & SL-1210MK4
SL-1200MK5 & SL-1210MK5
SL-1200MK5G & SL-1210MK5G
SL-1200MK5GLD & SL-1210MK5GLD
SL-1200LTD & SL-1210MK2PK

Technics SL-1200/1210 ProteX Black Ground Lead Elimination With Tonearm PCB 1.2m For Sale -

Technics SL-1200/1210 ProteX Black Ground Lead Elimination With Tonearm PCB 1.2m: $33.20

Technics SL-1200/1210 ProteX Black Ground Lead Elimination With Tonearm PCB 1.2m:
$33.20