Silicone Aquarium Sealant 100% Fish Safe - CLEAR or BLACK 10.2 oz by ASI For Sale -
This item has been shown 21683 times.
Silicone Aquarium Sealant 100% Fish Safe - CLEAR or BLACK 10.2 oz by ASI:
Common Bonding Substrates:
ASI Aquarium Silicone Sealant can be used on a variety of substrates that are not listed below. Please inquire or test on the those substrates. We have listed some common substrates below.
This Silicone works on...
ASI Aquarium Silicone Sealant has been specifically formulated for the fabrication offresh and salt-water aquariums.
Thishigh modulus component RTV SiliconeSealant formsstrong cohesive bondsto glass without the need of primers.
The bonds areunaffected by continuous immersion in waterand, when fully cured, isnon-toxic to fish.
ASI Aquarium Silicone Sealant is anon-slump sealantand can be applied to vertical surfaces without flowing or sagging.
Excellent tensile strength
Excellentprimerless adhesionto glass
Bond unaffected by continuous immersion in water
Because ASI Aquarium Silicone Sealant is a100% silicone sealant, it has excellentresistance to weathering including ozone, ultra-violet radiation and airborne chemicals.
ASI Aquarium Silicone Sealant can be applied to surface temperatures from-18°C to +50°C (0°F to +120°F)and after curing, withstands constant operating temperatures from-57°C to +233°C (-70° F to 450°F).
For successful bonding, glass must be clean of all dust, dirt and oil. The presence of these contaminants may impede the development of the bond. Therefore, it is essential that the glass be cleaned with suitable and compatible cleansers such as nonoily solvents, diluted solutions of acetic acid or extremely hot water. The cleaned glass should be wiped dry immediately with a clean, lint free cloth or blown dry with hot oil free air.
DO NOT clean glass with soap and water solutions. Soap residue can act as a release agent and result in adhesion failure.
Clean glass should be handled with clean, lint free gloves or equivalent only. Oils from hands and fingers can act a release agents resulting in adhesion failure.
1. Glass must be properly prepared as described.
2. Apply the aquarium sealant to edge surface of the glass to be joined to the non-edge surface. After application of the sealant, the assembled glass components should be tightly placed in a fixture or jig to allow sealant to flow evenly between joined surfaces and to give support during the internal sealing of the aquarium.
3. Selected bead size appropriate for the size of aquarium being constructed. Apply the sealant into the center of the joint formed by the sections of glass. Tool the sealant immediately after application. Any excess sealant should be removed before the sealant is cured by suing a clean cloth and a suitable solvent such as MEK (methyl ethyl Ketone), TCE (trichlorethylene) or alcohol.
Cured sealant can be trimmed with sharp blade. Allow sealant to cure at least 7 to 10 days before adding water and fish. This will ensure full cure and will allow the curing agent to totally dissipate.
The ASI Aquarium Silicone Sealant can be used to repair old or damaged aquariums.
1. Remove all of the damaged sealant, clean area to be repaired with a clean cloth and a suitable solvent. Apply sealant as described above and tool.
2. Check repaired aquarium for leaks before adding fish to tank. Fill aquarium with water and let sit for several days and check for any signs or leakage.
We only accept PayPal payment.
Please make sure your PayPal address is correct.
Please click the "Buy It Now" button to process your purchase.
We only ship to United States.
We ship items out Monday through Friday (except holidays). Our shipping cut-off time is 3 pm eastern. Any items paid after this time will not ship until the following business day.
Your items will be shipped within one business day, except for emergencies.
- Sellers are not responsible for service transit time. Transit time is provided by the carrier, excludes weekends and holidays, and may vary with package origin and destination, particularly during peak period.
We believe in 100% customer satisfaction.In case of return, Customers must contact us immediately, or within 3 days of receipt of the item. Buyer pays return.
Returns will be accepted only for the defective merchandise, or in the rare occasion that the wrong item was delivered. Items must be received in original condition (unused, un-worn) with all included accessories.
Refunds will be issued within 2-3 business days of receipt of item.
Any un-authorized return shipments will be refused.
We care for our customers, and appreciate your positive response.
If you are satisfied with the product, do not forget to share your valuable response with us. Your rating helps us to improve our services.