Rotary Attachment/Cylinder CO2 Laser Engraver Cutter Engraving Cutting Machine For Sale -

Rotary Attachment/Cylinder CO2 Laser Engraver Cutter Engraving Cutting Machine

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

Rotary Attachment/Cylinder CO2 Laser Engraver Cutter Engraving Cutting Machine:
$599.00

Laser Machine Rotary Attachment Laser Machine Rotary Attachment
The maximum length of processing:11.7"(30cm).
The maximum diameter of processing: 7.8"(20cm) .
Step motor: three wires(36V) Transmission mode: by belts
Transmission proportion: 1:3
Weight: 28.66lb(13kg)
Size: 20.08*6.24* 7.41(520*160*190mm)
The weight of holding: <44.09lb(<20kg ) #1: It is the 3 claws of the rotary. It can be used for fixingthe engraving objects, used alone, can also be used inconjunction with the#2.
#2: To fix carved objects with #1.To adjust the distance between 1# and 9# by the slide bar. Andthe specific distance/length be determined by the length of thesculpture objects.
#3: To adjust the distance between the 3 claws of the rotary and1#. And the specific distance/length be determined by thediameter of the sculpture objects.
#4: Connect the laser machine position #6.Pay attention tomounting screws in the installation position.
#5 : After Engraving objects placed between #1#2, it can be usedfor fixing objects and preventing the #2 sliding and theresulting carved objects slide off. #7: The anti claw of therotary. It can be used for fixing the hollow carved objects.
#8 : The wrench. To adjust the distance of the 3 claws of therotary.The installation and application of the axis of rotary:The carving glass asan example to introduce the usage of the rotary simply.
First: to install the rotary.first to put down the platform, down to the level can put on the axis ofrotary. And to make sure it can not be touched with the laser head.Put the axis of rotary on the laser platform.
★The position of theaxis should be horizontal with the x axis. Then put the glass bottle inthe axis.
★Toadjust the Y axis to make the laser head be vertical with the top of theplatform.#6 This should be attached with the rotary.
★You should unsnatch thescrews first when you install.
★Keep the wires away from the laser head and the rotary in order toprevent the confusion wires.•To prepare 3-4 pieces of thin paper. The size approximately is3.12"(80mm*80mm)
•Keep one piece of paper wet, and paste on thebottle. Others is reserved for other usages.
•Adjust the laser head to the top left of the paper. The installation of thesoftware:The function of this axis is to replace the Yaxis. So after you install the software, the Plug-in unit,RDCAMSetup6.0.24,youhave installed before can drive.

As the different motor has different step, youshould adjust the Parameters of the rotary. As following:

1.

Open the Coreldraw

Draw a square: 3.45*3.45" (50MM*50MM). See theleft picture, open the plug-in unit.

2.

The interface may be show in English or Chinese,you can change by yourself. See the left picture.

3.

In the "config" to select the "vendor param". Seethe picture. And the password is RD8888

4.

In the "vendor param" to choose the "Axis", thenchoose the "Y"( as this axis is to replace the Y axis.)

Then to choose the "Read" in the right side, toread the data of Y axis. (You should keep the laser machine connected to thecomputer, and be in active state )

See the following picture.

5.

(The left picture shows the data of the Y axis.You should make sure the data is not the X axis. Be careful!)

In the "Step length (um)", you will see a data.And you should write down this data, it is very important to recover the Y axis.You should write down in your textbook to make sure you can find it at any time.

6.

After save the data of the "Step length (um)",then we can adjust the data of the rotary.

First, to select the square (50mm*50mm,thesquare we have select in Coreldraw before)

Then, choose the "write" in the right.

And then, choose the "cancel" to quit.

7.

•Change the cutting power of the laser to 12.(Thiscutting power is just to cut one piece of paper, and specific conditions you canreference the laser machine.)

•Begin to cut

•To measure the size of this square, is it theright size(50mm*50mm):

50mm* Amm

If the data of the "A" is less than 50mm, thengo back to step sixth, then enlarge the data"50"

If the data of the "A" is more than 50mm, thengo back to step sixth, then deflate the data"50"

•By this way, we can adjust the paper we havecut to the right size(50mm*50mm).

When youadjust well, you can save the data to use later without any adjustment. Item#Weight (kg)QTY130030161 Shipping & Handling DetailsDefault Shipping Cost or Free Shipping Information: -Default shipping cost or free shipping service is only for the lower 48 United States by UPS Ground or USPS. Other areas or needs other shipping ways, please contact us.
-Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas, there WILL be extra shipping costs, please contact us for more detailed information.
-Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer.Handling Time:Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Sales tax/Customs duties:Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer. Sales Tax of 8% will be applied for orders shipped within the state of California.
Damage In Shipping:Email or call us First! We will work with you to get the case resolved in the fastest method.Return / RefundIf you are not 100% happy with your purchase, please contact Us. Please don't directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding.Returns & Exchanges:
-All returns must be made within 30 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition.
-Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged.
-Returns that are the result of our seller's error: Buyer will receive a full refund of the item as well as shipping charges.
-All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details.
Defective & Damaged Products
-If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.
-Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method.
-If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above.PaymentPayPal:
PayPal preferred only with a confirmed address. We want you to feel secure in your purchase. Keep everything within PayPal and protects both buyer and seller.
eCheck Issues:
Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear. Then we will arrange shipments for you.Warranty & response--6 months' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
--Any warranty shipping cost to us is responsible by buyer.
--Any shipping cost to buyer is responsible by the seller.
--We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive response as it's very important for us. Thanks very much.

On May-07-17 at 23:09:39 PDT, seller added the following information:


Buy Now


Related items