Model Boat Plans Thornycroft Pilot Boat 40\" Radio Control Plan & building notes For Sale -
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Model Boat Plans Thornycroft Pilot Boat 40\" Radio Control Plan & building notes:
$6.99
Not a KIT or MODEL
*THIS for PLANS on Cd *
Printedplans available $ 12.99 Plus postage
If you wish a different method ofdelivery
Pleasecontact us
THORNYCROFT PILOT
SCALE3/4 in = 1 ft
Length40 1/2 in
Beam10 1/2 in
EngineElectricA splendid round bilgelaunch model 40 1/2in. x 10 in. of attractive appearance
By IAN SINCLAIR
Theprototype
MY attention was firstdrawn to this vessel in a leaflet from Thornycroft\'s local office in Glasgowbefore the amalgamation with Vosper. At least two or them were built, one forthe Bristol Pilotage Authority and the other for Belfast.
The launches had a lengthof 54ft, beam 14ft and a draught of 4-5ft. The engine gave 230 bhp. This putthem in the medium speed class at 12 knots. The Belfast launch had a singlescrew installation.
TheModel
When the time came tobuild the model, Thornycroft\'s Glasgow office had closed and an approach totheir London office drew a blank. However, I was lucky enough to come across asmall sheer plan in the Ship and Boat Builder, To obtain details of the deckarrangement I wrote to the local Bristol paper in the hope of obtainingphotographs. This too was unsuccessful, as was a letter to the Bristol PilotageAuthority.
This did not deter me.although lacking information, I could no longer call the model the NancyRaymond or the Eleanor Laura: It now became a representation of a pilot Iaunch.I bad already decided on a scale of 3/4\" to 1 ft This gave a model not toolarge for transport, but still gave a &000. Displacement for weight carrying.Another point I like about this scale is that 1/16 in equal to one inch fullsize. This is handy when making fittings and obviates a scale man having tograpple with a boat-hook of three inches diameter, etc.
TheHull
The keel was cut from alength of ½ in obeche. The stem was cut from the same piece and the two gluedand dowelled together. The cut-away portion in the keel for the shaft andbracket should be cut, leaving a little surplus, so that the shaft bracket,rudder tube and planking can be faired in when the time comes. The hole for theshaft tube should also be drilled at this time.
Note:These plans do not show power plant or R/C Insllation
Contents of Cd
Twelve DIGITAL PAGES OF INSTRUCTIONS and PHOTOS
files are PDF and JPEG
DIGITALFULL SIZE PLANS
PRINTSON SHEET 44” x 30”
Plan files are PDF, TIFF and JPEG
You may have these printed at a CopyHouse
ALSO INCLUDED
INSTRUCTIONS FOR PRINTING ON HOMEPRINTER
PLEASECHECK OUT OUR STORE FOR MORE
30 Day Money back Guarantee
SHIPPING
Includes 13% gst and 9% fee
No handling charge
Maileddaily
We will combine Shipping
USA and INTERNATIONAL SHIPPING TIME VARY
PLEASE ALLOW 10 to 14 DAYS
SomeCountry s 21 to 30 Days
Thank you or looking
Jim & Gin