Lapierre Cross Carbon... Team FDJ Cyclocross bike..Campagnolo 11 Speed.. Fulcrum For Sale -
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Lapierre Cross Carbon... Team FDJ Cyclocross bike..Campagnolo 11 Speed.. Fulcrum:
$1999.00
This is a fresh build of a 2012 LaPierre Team FDJ Cross Carbon cyclocross bike....
The Frame and all components except for the saddle are new, or demo pulled from other bikes.
Description from Lapierre on the frame...
Francaise des Jeux rider Francis Mourey is a UCI World Cup winner and multi-time French cyclocross national champion. Now you can ride the same frame he does with the CX Carbon. This high-modulus monocoque carbon frame boasts all the features you need to get out front on race day. Easton\'s EX90X carbon fork and integrated seat post will make sure you stay out front. Cables are routed along the flattened top tube for easy shouldering, geometry is tuned to handle the gnarliest courses and the carbon layup absorbs ruts and bumps while transmitting all your power to the ground. When the cowbells call, you\'ll be ready with Lapierre\'s CX Carbon.This Is a relatively rare bike, it has a Seatmast, and it\'s Di2 , or mechanical drivetrain capable
It also has a disc brake mount on the rear end. However the fork does not have that capabilityI built the bike with a complete new Campagnolo Athena 11speed drivetrain, and Cantilever BrakesI searched long and hard for a kit that had Ultra Torque cranks instead of the power torques the cranks are 172.5 and the rings are 53/39
If I were to actually cross race the bike I would set it up with a bash/single ring setup.It has Fulcrum Racing 1 wheelsRitchey WCS 4-Axis stem
Ritchey Evolution WCS carbon barsThe top tube is 56cm center to center
The head tube is 160mm
Stand over is 811mm
The reach is 387mm
The stack is 582mm
The Head tube angle is 72 degrees
The Seat tube angle is 73.5 degrees
The BB has a drop of -62mm
The Seat tube is 53cm center to top
The seat mast has been cut to 70cm from the center of the BB to the center line of the seat rail clamp the adjustment range with the included seat mast clamp is 40mm...So your range is 70cm-74cm from the center the BB to the center line of the seat rail clamp
This is an absolutely fantastic euro cross bike.
And it\'s been built with top shelf components.
The Frame and all components except for the saddle are new, or demo pulled from other bikes.
Description from Lapierre on the frame...
Francaise des Jeux rider Francis Mourey is a UCI World Cup winner and multi-time French cyclocross national champion. Now you can ride the same frame he does with the CX Carbon. This high-modulus monocoque carbon frame boasts all the features you need to get out front on race day. Easton\'s EX90X carbon fork and integrated seat post will make sure you stay out front. Cables are routed along the flattened top tube for easy shouldering, geometry is tuned to handle the gnarliest courses and the carbon layup absorbs ruts and bumps while transmitting all your power to the ground. When the cowbells call, you\'ll be ready with Lapierre\'s CX Carbon.This Is a relatively rare bike, it has a Seatmast, and it\'s Di2 , or mechanical drivetrain capable
It also has a disc brake mount on the rear end. However the fork does not have that capabilityI built the bike with a complete new Campagnolo Athena 11speed drivetrain, and Cantilever BrakesI searched long and hard for a kit that had Ultra Torque cranks instead of the power torques the cranks are 172.5 and the rings are 53/39
If I were to actually cross race the bike I would set it up with a bash/single ring setup.It has Fulcrum Racing 1 wheelsRitchey WCS 4-Axis stem
Ritchey Evolution WCS carbon barsThe top tube is 56cm center to center
The head tube is 160mm
Stand over is 811mm
The reach is 387mm
The stack is 582mm
The Head tube angle is 72 degrees
The Seat tube angle is 73.5 degrees
The BB has a drop of -62mm
The Seat tube is 53cm center to top
The seat mast has been cut to 70cm from the center of the BB to the center line of the seat rail clamp the adjustment range with the included seat mast clamp is 40mm...So your range is 70cm-74cm from the center the BB to the center line of the seat rail clamp
This is an absolutely fantastic euro cross bike.
And it\'s been built with top shelf components.
Related items