Ham Radio stuff: Kenwood, Icom transceivers, Astron pwr sply, LDG tuner, more For Sale -
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Ham Radio stuff: Kenwood, Icom transceivers, Astron pwr sply, LDG tuner, more:
$999.00
Attention all Ham Radio enthusiasts! Great deal on some awesome equipment! We have the following pieces available to one lucky buyer. I will ship this but any shipping would be by freight, and the charges could be substantial. Local pickup is always an option, and also delivery depending on where you live.Kenwood TS-570S transceiver
Icom IC-820H transceiver
LDG Electronics AT-200PC autotuner
Astron RM-60A power supply
microHAM Digi Keyer
Icom SM-8 Desk Microphone
Heavy-duty steel rack housing w/ built-in speakersHere are the features/specs for all of this stuff:Kenwood TS-570S transceiver – MSRP $1295.95
Features:
160-6 meters
Noise reduction
Automatic tuner
RIT/XIT
32-bit DSP IF
Down conversion
Keypad entry
Roofing filters
HF and 6M antenna jacks
Full and semi break-in
10Hz dual VFO display
USB portThe Kenwood® TS-590S provides impressive, yet affordable amateur operation on the HF and 6 meter bands. Thanks to a down-conversion receiver, narrow first roofing filter and dedicated first mixer, the TS-590S has the best dynamic range in its class when handling unwanted adjacent off-frequency signals¹. Having the first roofing filter (6 kHz BW) directly after the mixer enhances the noise blanker’s ability to deal with adjacent off-frequency signals. The result is excellent receive performance, revealing signals that would be hidden to lesser rigs.The TS-590S transmit section uses a die-cast aluminum chassis combined with a large heat-sink to increase heat dissipation efficiency. The cooling system uses the same size fan as in the previous model, but now uses two of them. This allows the fans to run at a much lower RPM while still providing more airflow. Lower RPM means less noise. This heavy-duty TX design is capable of withstanding long hours of operation under grueling conditions as found on DX-peditions or during contests. Excellent performance is expected, combined with ergonomic operation. The ARCP-590 Radio control program and ARHP-590 radio host program is available as a free download from the Kenwood site. The TS-590S is Sky Command® II ready.Icom IC-820H transceiver – MSRP $1288.50
Features:
All mode
116 memories
Call channel
Noise blanker
Dual digital VFO’s
Sub band receive/transmit
Satellite functions
9600 compatibleThe Icom IC-820H 2M/440 all-mode transceiver was built with state-of-the-art construction. Output level High on VHF 144-148 MHz is 45W SSB, 35W FM/CW. Output on UHF 430-450 MHz is 40W SSB, 30W FM/CW. Output level Low is 6 watts. Satellite operation on the IC-820 includes normal and reverse tracking for different modes of satellite communications; independent uplink/downlink control for Doppler shift compensation, separate satellite VFO and 10 satellite memories provide quick switching from normal to satellite operation as well easy recall of satellite uplink and downlink frequencies. This radio has independent controls and indications for both bands. Other features include: IF shift, 9600 baud Packet ready, AF speech compression, noise blanker, RIT and CW semi-breakin and sidetone.LDG Electronics AT-200PC autotuner – MSRP $259
Features/specs:
5 to 250 watts SSB and CW. (100 watts on 6M)
16,000 3D memories for instantaneous band changing
Two position antenna switch with memories for four antennas on each position
Tuning time: 0.5 to 6 seconds full tune, < 0.1 second memory tune
Built in frequency counter for memory operation
Frequency coverage: 1.8 to 54.0 MHz.
Tunes 6 to 1000 ohm loads (16 to 150 ohms on 6M), 6 to 4000 ohms with optional 4:1 Balun (LDG RBA 4-1)
For Dipoles, Verticals, Vs, Beams or and Coax Fed Antenna
Optional external Balun allows tuning of random length, long wire or ladder line fed antennas
Power requirements: 11 to 16 volts DC at 750 mA max during tuning
Includes: 6 foot power cable, 10 foot serial cable and USB adapter.
Enclosure: 8.5D x 6.0W x 2.0H inches
Weight: 2 poundsAstron RM-60A power supply –MSRP $487.95
Features:
Solid State Electronically Regulated
Fold-Back Current Limiting Protects Power Supply from excessive current &
continuous shorted output.
Crowbar Over Voltage Protection
Maintain Regulation & Low Ripple at low line input voltage.
Heavy Duty Heat Sink
Chassis Mount Fuse
Three Conductor Power Cord Specifications:Input Voltage 105 - 125Vac
Output Voltage 13.8Vdc +/- 0.05Volts (internally Adjustable 11-15V)
Ripple Less than 5mV peak-peak (full load & low line)
Continuous Duty 50 Amps
ICS 55 Amps
Size 7" x 19" x 12-1/2"
Shipping Weight 55 lbs.microHAM Digi Keyer - MSRP $329
Features:
DIGI KEYER is a multi-mode interface between computer and transceiver. It has been optimized for
amateur digital modes and includes a high performance USB sound processor.DIGI KEYER is connected to the computer using a single A-B USB cable which is included.The transceiver and DIGI KEYER are connected by single radio cable terminated on one side by a DB15M
and on the other side by the appropriate plugs for the specific transceiver model. The cable carries power
for DIGI KEYER, audio, CAT control and keying. The appropriate cable for the target radio is specified
when DIGI KEYER is purchased.If a Windows PC running the "microHAM USB Device Router" program is connected, DIGI KEYER works
as a computer interface. It transfers all digital and analog signals generated by the computer logging
program or digital mode package between the computer and transceiver. Software compatibility is
provided by using virtual serial ports. Router monitors these virtual ports and transfers any data or
commands by USB to the micro controller in DIGI KEYER. DIGI KEYER processes this data and sends it
to the physical ports of transceiver as CAT, CW, and PTT functions.The USB sound processor in DIGI KEYER independently provides analog to digital conversion of audio
from the transceiver and transfers it via USB to the computer where the Windows sound system processes
that data as a “sound card.” The USB sound processor also receives digital audio from any applications
running on computer and converts that data into audio signals to modulate the transceiver.microHAM Device Router is not required in order to enable the USB sound functions. The USB sound
processor is supported directly by Windows, Apple OS 10, and LINUX and may be used by any application
compatible with those operating systems.Icom SM-8 Desk Microphone - MSRP $139.95
Features:
The Icom SM-8 desk mic has an electret condenser type mic element and gives clear tone over a wide variety of voice levels. The gooseneck may be adjusted to any angle. It features UP-DOWN tuning (on compatible Icom transceivers). There is a switch for PTT (push to talk) and also a lock feature. This mic has two line inputs (A/B) for operation from two transceivers. Also features HIGH and LOW output and a tone control to tweak the audio just right.All of this equipment is housed in a durable steel rack with built-in monitor speakers. All together this stuff would retail for over $3700, not including the rack housing. This is a STEAL at $999! Shipping would be by freight, we will have to work that out later, or local pickup, whatever works. Don’t wait, buy it today and you’ll be chatting it up with Nova Scotia babes by dinner time!
Icom IC-820H transceiver
LDG Electronics AT-200PC autotuner
Astron RM-60A power supply
microHAM Digi Keyer
Icom SM-8 Desk Microphone
Heavy-duty steel rack housing w/ built-in speakersHere are the features/specs for all of this stuff:Kenwood TS-570S transceiver – MSRP $1295.95
Features:
160-6 meters
Noise reduction
Automatic tuner
RIT/XIT
32-bit DSP IF
Down conversion
Keypad entry
Roofing filters
HF and 6M antenna jacks
Full and semi break-in
10Hz dual VFO display
USB portThe Kenwood® TS-590S provides impressive, yet affordable amateur operation on the HF and 6 meter bands. Thanks to a down-conversion receiver, narrow first roofing filter and dedicated first mixer, the TS-590S has the best dynamic range in its class when handling unwanted adjacent off-frequency signals¹. Having the first roofing filter (6 kHz BW) directly after the mixer enhances the noise blanker’s ability to deal with adjacent off-frequency signals. The result is excellent receive performance, revealing signals that would be hidden to lesser rigs.The TS-590S transmit section uses a die-cast aluminum chassis combined with a large heat-sink to increase heat dissipation efficiency. The cooling system uses the same size fan as in the previous model, but now uses two of them. This allows the fans to run at a much lower RPM while still providing more airflow. Lower RPM means less noise. This heavy-duty TX design is capable of withstanding long hours of operation under grueling conditions as found on DX-peditions or during contests. Excellent performance is expected, combined with ergonomic operation. The ARCP-590 Radio control program and ARHP-590 radio host program is available as a free download from the Kenwood site. The TS-590S is Sky Command® II ready.Icom IC-820H transceiver – MSRP $1288.50
Features:
All mode
116 memories
Call channel
Noise blanker
Dual digital VFO’s
Sub band receive/transmit
Satellite functions
9600 compatibleThe Icom IC-820H 2M/440 all-mode transceiver was built with state-of-the-art construction. Output level High on VHF 144-148 MHz is 45W SSB, 35W FM/CW. Output on UHF 430-450 MHz is 40W SSB, 30W FM/CW. Output level Low is 6 watts. Satellite operation on the IC-820 includes normal and reverse tracking for different modes of satellite communications; independent uplink/downlink control for Doppler shift compensation, separate satellite VFO and 10 satellite memories provide quick switching from normal to satellite operation as well easy recall of satellite uplink and downlink frequencies. This radio has independent controls and indications for both bands. Other features include: IF shift, 9600 baud Packet ready, AF speech compression, noise blanker, RIT and CW semi-breakin and sidetone.LDG Electronics AT-200PC autotuner – MSRP $259
Features/specs:
5 to 250 watts SSB and CW. (100 watts on 6M)
16,000 3D memories for instantaneous band changing
Two position antenna switch with memories for four antennas on each position
Tuning time: 0.5 to 6 seconds full tune, < 0.1 second memory tune
Built in frequency counter for memory operation
Frequency coverage: 1.8 to 54.0 MHz.
Tunes 6 to 1000 ohm loads (16 to 150 ohms on 6M), 6 to 4000 ohms with optional 4:1 Balun (LDG RBA 4-1)
For Dipoles, Verticals, Vs, Beams or and Coax Fed Antenna
Optional external Balun allows tuning of random length, long wire or ladder line fed antennas
Power requirements: 11 to 16 volts DC at 750 mA max during tuning
Includes: 6 foot power cable, 10 foot serial cable and USB adapter.
Enclosure: 8.5D x 6.0W x 2.0H inches
Weight: 2 poundsAstron RM-60A power supply –MSRP $487.95
Features:
Solid State Electronically Regulated
Fold-Back Current Limiting Protects Power Supply from excessive current &
continuous shorted output.
Crowbar Over Voltage Protection
Maintain Regulation & Low Ripple at low line input voltage.
Heavy Duty Heat Sink
Chassis Mount Fuse
Three Conductor Power Cord Specifications:Input Voltage 105 - 125Vac
Output Voltage 13.8Vdc +/- 0.05Volts (internally Adjustable 11-15V)
Ripple Less than 5mV peak-peak (full load & low line)
Continuous Duty 50 Amps
ICS 55 Amps
Size 7" x 19" x 12-1/2"
Shipping Weight 55 lbs.microHAM Digi Keyer - MSRP $329
Features:
DIGI KEYER is a multi-mode interface between computer and transceiver. It has been optimized for
amateur digital modes and includes a high performance USB sound processor.DIGI KEYER is connected to the computer using a single A-B USB cable which is included.The transceiver and DIGI KEYER are connected by single radio cable terminated on one side by a DB15M
and on the other side by the appropriate plugs for the specific transceiver model. The cable carries power
for DIGI KEYER, audio, CAT control and keying. The appropriate cable for the target radio is specified
when DIGI KEYER is purchased.If a Windows PC running the "microHAM USB Device Router" program is connected, DIGI KEYER works
as a computer interface. It transfers all digital and analog signals generated by the computer logging
program or digital mode package between the computer and transceiver. Software compatibility is
provided by using virtual serial ports. Router monitors these virtual ports and transfers any data or
commands by USB to the micro controller in DIGI KEYER. DIGI KEYER processes this data and sends it
to the physical ports of transceiver as CAT, CW, and PTT functions.The USB sound processor in DIGI KEYER independently provides analog to digital conversion of audio
from the transceiver and transfers it via USB to the computer where the Windows sound system processes
that data as a “sound card.” The USB sound processor also receives digital audio from any applications
running on computer and converts that data into audio signals to modulate the transceiver.microHAM Device Router is not required in order to enable the USB sound functions. The USB sound
processor is supported directly by Windows, Apple OS 10, and LINUX and may be used by any application
compatible with those operating systems.Icom SM-8 Desk Microphone - MSRP $139.95
Features:
The Icom SM-8 desk mic has an electret condenser type mic element and gives clear tone over a wide variety of voice levels. The gooseneck may be adjusted to any angle. It features UP-DOWN tuning (on compatible Icom transceivers). There is a switch for PTT (push to talk) and also a lock feature. This mic has two line inputs (A/B) for operation from two transceivers. Also features HIGH and LOW output and a tone control to tweak the audio just right.All of this equipment is housed in a durable steel rack with built-in monitor speakers. All together this stuff would retail for over $3700, not including the rack housing. This is a STEAL at $999! Shipping would be by freight, we will have to work that out later, or local pickup, whatever works. Don’t wait, buy it today and you’ll be chatting it up with Nova Scotia babes by dinner time!
Related items