FM 87.5-108MHz 1 kw (1000w) RF amplifier pallet with AMPLEON BLF188XR BRICK For Sale -
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
FM 87.5-108MHz 1 kw (1000w) RF amplifier pallet with AMPLEON BLF188XR BRICK:
$1050.00
Power Amplifier 1000 Watt FM 88-108 Mhz Designed primarily for FM application, this amplifier is suitable for any CW or pulsed application. - 87.5 - 108 MHz
- Pout: 1000 W
- Gain: 23 dB
- Extreme Ruggedness (VSWR 65:1)
- Class B
- Device: AMPLEON BLF188XR
- Supply : 30-50 V - DC 50V nominal
- Size (LxWxH): 193x100x72 mm (7.60\"x 2.54\" x 2.83\")Notes:
Before design the system integration of this amplifier, read carefully the following information.
Please, remember that Initel Telecomponents engineers are availablele to help customers in any design activity.Note 1 (Thermal exchanger requirements)
Max operative temperature is the case temperature of the BLF188XR and is referred to the
worst operative condition (T air = 45°C - Pout = 1000W @ 87.5 MHz)Note 2 (Load matching)
This amplifier can work without power reduction on a 2:1 VSWR load matching.
In this condition phase and temperature are irrelevant.
Please remember that this specification is valid only in CW or FM application, Pulsed signal or other kind of modulation can stronglyaffect this limit.
Since this amplifier is designed on a single RF device, with a load matching below -10dB, power output can change up to +/- 1.5dB in function of reflected signal phase.Please, foresee a current limiter in the supply system, to avoid device overstressNote 3 (Shielding)
Due to the high gain of this pallet, a good shielding between final stage and any driver/low power stage is required. Please, foresee a good RFchoke also on the supply wiring. On request, Initel Telecomponents can provide an analysis on your line up.Note 4 (Overdrive)
High driver level can damage this amplifier. The equipment, where the amplifier will be mounted, must foresee an appropriate protection circuit. Power input cannot exceed 8WNote 5 (Efficiency)
Amplifier efficiency is function of supply voltage.
In order to obtain maximum efficiency, please reduce supply voltage in function of desired output power.
The typical required input power is 5W.
High voltage supply and low input power involve a sensible reduction in the efficiency.
No confíe en los comerciantes improvisados!Tenemos más de 1000 comentarios positivos 100%
ATENCIÓN: No se aceptan ofertas por parte de los usuarios con menos de 5 votación.We recommend that the equipment installation should be made by qualified technicians.For manuals,datasheet, discount and other information contact us.
SHIPMENTS:We ship worldwide. Regarding the shipping cost, before buying the item, always ask how much the shipment cost.The shipments costs, in some cases, are incorrect. We try, each time, the courier cheaper, suitable and reliable.
PAYMENT: We want to inform all of our customers, the preferred method of payment is bank transfer. We accept Paypal for payment even, but as Paypal holds the money paid by the buyer (even for 10/20 days), we will proceed to ship the item only when the funds will be released.
- Pout: 1000 W
- Gain: 23 dB
- Extreme Ruggedness (VSWR 65:1)
- Class B
- Device: AMPLEON BLF188XR
- Supply : 30-50 V - DC 50V nominal
- Size (LxWxH): 193x100x72 mm (7.60\"x 2.54\" x 2.83\")Notes:
Before design the system integration of this amplifier, read carefully the following information.
Please, remember that Initel Telecomponents engineers are availablele to help customers in any design activity.Note 1 (Thermal exchanger requirements)
Max operative temperature is the case temperature of the BLF188XR and is referred to the
worst operative condition (T air = 45°C - Pout = 1000W @ 87.5 MHz)Note 2 (Load matching)
This amplifier can work without power reduction on a 2:1 VSWR load matching.
In this condition phase and temperature are irrelevant.
Please remember that this specification is valid only in CW or FM application, Pulsed signal or other kind of modulation can stronglyaffect this limit.
Since this amplifier is designed on a single RF device, with a load matching below -10dB, power output can change up to +/- 1.5dB in function of reflected signal phase.Please, foresee a current limiter in the supply system, to avoid device overstressNote 3 (Shielding)
Due to the high gain of this pallet, a good shielding between final stage and any driver/low power stage is required. Please, foresee a good RFchoke also on the supply wiring. On request, Initel Telecomponents can provide an analysis on your line up.Note 4 (Overdrive)
High driver level can damage this amplifier. The equipment, where the amplifier will be mounted, must foresee an appropriate protection circuit. Power input cannot exceed 8WNote 5 (Efficiency)
Amplifier efficiency is function of supply voltage.
In order to obtain maximum efficiency, please reduce supply voltage in function of desired output power.
The typical required input power is 5W.
High voltage supply and low input power involve a sensible reduction in the efficiency.
No confíe en los comerciantes improvisados!Tenemos más de 1000 comentarios positivos 100%
ATENCIÓN: No se aceptan ofertas por parte de los usuarios con menos de 5 votación.We recommend that the equipment installation should be made by qualified technicians.For manuals,datasheet, discount and other information contact us.
SHIPMENTS:We ship worldwide. Regarding the shipping cost, before buying the item, always ask how much the shipment cost.The shipments costs, in some cases, are incorrect. We try, each time, the courier cheaper, suitable and reliable.
PAYMENT: We want to inform all of our customers, the preferred method of payment is bank transfer. We accept Paypal for payment even, but as Paypal holds the money paid by the buyer (even for 10/20 days), we will proceed to ship the item only when the funds will be released.
Related items