DSP CLEAR SPEECH NOISE REDUCING PROCESSOR WEST MOUNTAIN RADIO For Sale -

DSP CLEAR SPEECH NOISE REDUCING PROCESSOR WEST MOUNTAIN RADIO

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

DSP CLEAR SPEECH NOISE REDUCING PROCESSOR WEST MOUNTAIN RADIO:
$99.99

Up For Buy It Now (1) DSP CLEAR SPEECH NOISE REDUCING PROCESSOR WEST MOUNTAIN RADIOIncluded is everything shown on pictures. DSP, manual, cables and original box. Works fine, no issues."Thanks For Looking"The noise reduction circuit and audio amplifier in CLRspkr is extremely effective in improving communication clarity. Mobile and base operation is less fatiguing and much more fun! CLRdsp noise reduction is superb due to the Digital Signal Processor (DSP) passing voice and CW sounds, while attenuating noise, such as atmospheric noise, hum, hiss, whistles, and static. It effectively removes heterodynes, ignition noise, lightening crashes, power line noise. The process is dynamic and changes with the interference and the signal, but the effect is rewarding. QSO's are more fun without all the background noise. The DSP recognizes the intermittent nature of CW and allows it to pass noise free. CLRdsp may be mounted in any convenient location, such as under a station speaker. It fits perfectly under the West Mountain Radio COMspkr. Included are two (2) 6ft. cables with 1/8-inch stereo audio connectors for audio input and external speaker output. Volume and DSP filtering levels may be adjusted by use of the front panel controls. A headphone connector on the front may be used with any stereo headphone set. The unit also includes a 6ft. power cable with Powerpole connectors that will plug into a 13.8 volt supply. Choosing a Mounting Location The CLRdsp should be placed nearby for easy operation and close to the radio, speaker, and power supply. The 6ft. cables can be lengthened with extensions. This unit is not weather resistant and suggested to use in a dry place out of direct sunlight.
Connections
Audio Input Jack:
Audio input is via the 1/8-inch stereo jack. Use the supplied 6ft. stereo cable to plug into the headphone output or the external speaker output on the radio. If a radio has a stereo output, the CLRdsp will only receive the left output. The audio input is transformer coupled within the CLRdsp to reduce any "ground loops".
**NOTE for Stereo Cables: The CLRdsp is only one channel. The stereo jack cable uses only the tip and ground. If using a mono plug into a stereo jack, one channel gets shorted to ground and may damage the source. To prevent problems, a stereo cable is supplied. A stereo jack will use only one channel, but still works with a mono plug.

Buy Now


Related items