BMW 55W HID conversion kit E36 E46 E90 E91 E92 E93 M3 F30 F31 F35 No OBC error For Sale -

Slim 55W HID Xenon CANBUS Conversion kit (Japan technology)

Fit all BMWmodels

100% no dashboard error, no flicking, no strobeeffect.

Money BackGuarantee

The kitincludes 2 x ballasts and 2 x bulbs.

Thecompatibilitylist may not be exhausted.

Please contact us for more compatibility details

Package included:

1. Two(2) x 55W HID bulbs

2. Two(2) AC 55W Slim CANBUSBallasts.

3. Installation manual

4. Warranty Card

5. Secure Carton Box packing

6. 2-year warranty

•100% no dashboard error, no flickering.

If you not sure bulb fitment, please refercar\'s \"Owner Manual\" or

Bulbs Model Gide here

Ballasts features:

•55W Slim CANBUS Ballasts,Japan technology.

•Low ignition voltage: cold light up: < 8A.

•Warm light up: < 5.2A; Stable working: 4.4A.

•Voltage protection: when less than 9V, ballast will stop working in

order toavoid HID bulb burnout.

•Short-circuit protection: less than 1s.

•Constant voltage supply.

•Bulb voltage monitoring; Optimizing bulb\'s working parameter.

•High performance of insulation, waterproof and quake-proof.

•Certificate: TUV, ISO, DOT, CE, E11.

Bulbs features:

•55WHigh quality Germany Quartz ArcTMUV-StopTMBurner

•Plug and Play installation and upgrade

•40% less power consumption than OEM halogen bulbs

•5 times light intensity than OEM halogen Light bulbs

• Lifespan: 5000hrs (3 times longer over cheap product)
• TUV, E4, CE,RoHS, ISO 9001:2000

Thecompatibilitylist may not be exhausted. Please contact us for more compatibility details

Plug and Play QuickSnapTMAMP connectors

Easy Installation

Bulb color choices?

The color temperature is purely a scale tomeasure the color of the light. The higher the color temperature (degrees K)doesn\'t mean a higher light intensity (lumen). The reality is the higher up theK value the lamps are the less bright they become. The brightest shine are 4300,6000k and 8000, amid 6000K is close to the sunlight and most comfortable to oureyes, also benefiting for the safe driving.

This CANBUS conversion kit are perfect for BMW\'s owners they are looking for a better lighting outputand a more aggressive look for their rides.

Below are some responses received from our satisfiedcustomers about the kit

Combined shipping:
There are no combined shipping as the postage is based on weight andcubage of goods plus the free.However, discount enquiries for bulkpurchases (more than 3 pieces / pairs / kits) are welcome

Shipping and Handling:

• We ship every Mondays through Fridays.

• Your purchase will be shipped within 4 - 48 hours viae-Express(US, UK, AU, CA and NZ) or

Hong Kong Post Registered International Airmail.

Estimated Delivery Time:

* 4-8 WORKING days to all US addresses.

* 6-12 WORKINGdays to UK, Australia.

* 7-14 WORKINGdays to Singapore, Thailand and most of Asia countries.

* 11-30 WORKINGdays to Europe and the rest of the world.

** If you item didn\'tarrive within estimated delivery time, please contact usdirectly. Our expect team will swiftly diagnose the issue and answerASAP.**

• No Hidden Costs!Allimport duties, taxes, and charges areincluded.

• We do offer EMS, UPS, FedEx and DHL express shippingservices. Please do contact us first.

Payment:

• Weaccept all major credit and debit cards.

PayPalaccount IS NOT NECESSARY!

• Dueto security reason, your merchandise will ship

to the address recorded in payment card ONLY.

• If you wantto canceltheorder or have a problem with

thepayment card,please contact us directly.

• Please note that system strictly will open a

dispute for unpaid order automatically when buyerdidn’t

pay4 daysafter purchase.An unpaid item recordwill be

added tobuyer\'sA/C if still not pay onnext 4 days.

Warranty:

Buy confidence. Your purchase come with 2-year warrantyof all factory defects. We will issue replacement free of charge if anycomponents fail within warranty period. Buyers may need send back thedefective components to us for testing but pleasedo contact us first (or may go through the Troubleshooting to verify theproblems first). Any Damage caused during installation and misuses arenot considered as product deficiency and will not be covered bywarranty.

Return:
You purchase come with a30-day hassle-free money back guaranteeafter the date you received it.Please CONTACT US directly if you want to return the purchased merchandise. return process is slow!Buyer will be responsible for returnpostage of UNWANTED item, unless the productisdeemed factory defects by ProGear Tech.

Troubleshooting

How to make sure the HID kit will workproperly every time.

Turn the engine on first, beforeturning on the HID kit.

Do not turn the HID on and offfrequently.

Do not install the HID ballastsnear the engine nor anywhere the water can easily get onto.

Make sure the connectors of theHID kit are tightly secured to the stock harness.

Bulbs flicking during operation

Disconnect all the connectors. Clean all connectors with alcohol.Wait more than 5 minutes to reset ballast micro-processer and thenreconnect the connectors.

Inspect all the connections between ballasts and vehicles wireharness.

Inspect all the connections between igniter module and HID bulbmodules.

Inspect the fuses. Use at least 25 Amp fuse if both lights share thesame fuse; Use at least 15 Amp fuse for each light if lights useseparate fuses.

Determine if additional high-power relay wirings are required toprovide sufficient power to the HID systems.

Do not loss mating or mis-wiring connections.

Disable DRL (Daytime Running Light) and/or Auto On/Off Headlampfeatures.

On-board computer displays light failurewarnings when the HID lights are turned on.

Purchase the \"Disable On-boardcomputer warning feature\" option with the HID system.

Inspect for electrical currentinstability. Install additional wire relay if necessary.

HID bulb modules won\'t fit.

Double check to see if youpurchased the appropriate bulb type for your vehicle. You can refer toyour vehicle’s owner’s manual for the bulb size. Some vehicles requirean adaptor to hold the bulb in place.

HID turns on then both sides go out.

There is a possibility that thefuses are blown. Please check your fuses box according to your vehicle\'suser manual and upgrade the stock 15 Amp or 20 Amp headlight fuse to 25Amp or up. The 25 Amp fuses are 100% safe for your vehicle and will notcause damage to your vehicle’s electrical system.

HID will only work when the high beam isturn on.

This particular situationcommonly happens with the H4/9007/9004 HID conversion kits because ithas three prong plug rather than just \"+\" and \"-\". Make sure you haveplugged those three wires correctly to their positions. Usually thecombination is Yellow, Black and Red.

HID will shut down itself sometimes.

Inside the HID ballast, there isa micro chip which is used to detect whether there is any potentialproblems, such as sudden high impulse or shortage of power input frombattery or extremely high heat will trigger the self-protect and shutthe ballast off temporarily. It takes about 5 mins for the micro chip toreset itself and the ballast will be working again. Once this happens,please turn off the HID and wait about 5 to 10 mins.

If the lights vibrate while driving

Ensure that the bulbs aresecurely installed in the light housing socket. Some DC (direct current)ballasts are inevitable have vibration.

Determine if additionalhigh-power relay wirings are required to provide sufficient power to theHID systems.

Inspection Procedure: Pleasecheck the car battery. Check all connections between the bulb & ballast.Check the vehicle battery terminal.

HID works when the engine is off, but ifturning on the engine the HID will turn off itself.

For some newer model vehiclessuch as BMW, Mercedes and a few American models, they have onboardcomputers to restrict outsource components such as HID conversion kit oraftermarket MP3 Players. Therefore, the only way for such cars toinstall the HID kit is to install a canceller cable.

One or both light can\'t ignite initially.Bulb turns off after the vehicle just starts.
You must DISABLE DaytimeRunning Light or \"Auto Switch-On\" functions before the HID installation.

HID system requires a steadylevel of battery voltage of at least 12V initially. “Auto Switch-On” andDaytime Running Light functions draw power from the vehicle batterywhich causes the HID system to fail to initially ignite.

If you have Daytime RunningLight, disconnect the fuse or wiring of Daytime Running lights only.Please contact your vehicle dealer/manufacturer for more information.

If you have \"Auto Switch-On\"Headlight function, ensure to switch the function to \"Manual Switch-On\"headlight mode.
To avoid further damages, always remember to start your vehicle beforeturn on the HID system.

Determine if additionalhigh-power relay wirings are required to provide sufficient power to theHID systems.

Only one light works, even though bothlights are installed exactly the same.

1. The polarity (positive &negative) of one side might not match with the factory wiring harness.

2. Fuse might be blown on thisside.

3. Malfunctioned parts.
Troubleshoot by: Check all connections between the bulb and ballast.Check the bulb that does not work to make sure there are no loose wires.Check the fuses. Use at least 25A fuse if the stock 15A fuse blows.Switch the bulb to the working one/side to see if the problem remains.If the issue remains, the bulb may be defective. Switch the ballast tothe working one/side to see if the problem remains. If the issueremains, the ballast may be defective. If the HID system works properly,your vehicle connections, battery, alternator, etc. may have problems.

Determine if additionalhigh-power relay wirings are required to provide sufficient power to theHID systems.

Disable DRL (Daytime RunningLight) and/or Auto On/Off Headlamp features.

The colors or lighting effects of the twobulbs are different.

The leveling of the headlighthousings are not even, adjustment of the headlight housings is needed.

For new bulbs, there are chancesthat the colors are different for first couple hours of burning. Thecolor will become normal once it’s been run for a short period of time.

Inspection Procedure: Inspectfor damage in the light housing. Clean the lens of the light. Inspectthe positioning of lights to ensure both are at the same angle to theroad.

The HID bulbs changes color when firstturn on.

This is totally normal. At thebeginning, the ballasts are storing the power from the battery of thecar. Since the power has not been stabilized yet, the bulbs might havedifferent colors or even flicker a little bit. However, as soon as thepower is stabilized by the ballast, the bulbs will become normal.

The HID works initially but starts toflicker sometimes.

There is a possibility that itmight be caused by either damaged bulbs or ballast.

Inspection Procedure: Disconnectall the connectors immediately. Clean every connector with alcohol. Waitmore than 5 minutes then reconnect or reinstall every connector. Thencheck all the connection between ballast and factory harness (PowerSource); check all the connection between igniters and bulbs (yellowsilicone connectors); check your upgraded fuse, they must be 25ampminimum. Remember, every connector have to be 100% well connected toeach other

One light is brighter than the other.

Inspect for damage in the lighthousing.

Clean the lens of the light.

Switch the failing bulb moduleto the working side to see if the problem remains. If the failing lightnow works, the Ballast and/or Igniter may be malfunctioned. If theproblem still persists on, the bulb may be failed.

Inspect the positioning oflights to ensure both are at the same angle to the road.

Disable DRL (Daytime RunningLight) and/or Auto On/Off Headlamp features.

Lamp Has Been Operating : Cool Down TimeInsufficient (Hot Restrike)

When HID lamps are operating and thesupply voltage is cut or interrupted, the lamps will require a period oftime to cool and re-establish optimum starting conditions. It requirefrom four to eight minutes cool down time. The restart time varies withthe degree of ventilation, ambient temperature, and draft conditions.The time from cool to able to start condition can realistically range upto 20 minutes. However, some newly design ballasts can overcome suchissue and no cool down time needed.