Aquarium DIY CO2 Citric acid and Baking soda Canister,CO2 Regulator, solenoid For Sale -

Aquarium CO2 Regulator, Solenoid, bubble counter, Check Valve,

carbon dioxide DIY Bottle

Citric acid and Baking soda Canister

Description:

Bottle Material: Stainless Steel

Volumn: 2L /4L

2L Bottle Size: 38*10*10cm

4LBottle Size:47*13.5*13.5cm

Solenoid Voltage:110V or 220V

With its fine tuning capabilities and electronic regulation, this CO2 Regulator meets the highest industry quality standard.

Just need to when using citric acid, baking soda, water in the bottle, can produce carbon dioxide, few minute later.Its like inflatablecylinders stable working pressure, for various reasons could not use the cylinder players, absolutely is the best choice in homemade co2equipment.

Operation method:

1. Remove the cover first, and then use the water bottles in the middle position of nabla cut, on top of the upper of the place can be asa funnel, pour 1 part baking soda 200g (400g for 4L Canister).

2. and then continue to join citric acid200g (400g for 4L Canister).

3. Use cut open the bottle filled with water, just 300ml (600ml for 4L Canister)..Note: please do not add water first.

4. Use a clean cloth to clean bottle residue, quickly and then tighten the cover.

5. After waiting forfewminutes, let the bottle of raw material sufficient reaction (around slightly shaking the bottle)

6. Remove the power cord, electromagnetic valve socket connection, will the power electricity.

7. Rotary valve cover the above adjustment valve, test whether there is gas in the bottle

8.Good stiff connection pipe, adjust their required air output, normal use.

Matters needing attention

♥Bottle had better put some lubricant in thread, in order to easy to unscrew bonnet next time.

♥Tighten the coverno pressure too much, just twist to the pressure gauge is the sticker on the bottle.

♥The bottle upside down and shake up and down is forofferden, in order to avoid raw material to block air flow.

♥Bubble gauge there may be a leakage of the water transport, and need to unscrew stiff upper metal nut to add water.

Aquarium CO2 Regulator, bubble counter, Check Valve,

carbon dioxide DIY Bottle

Citric acid and Baking soda Canister

Description:

Bottle Material: Stainless Steel

Volumn: 2.3L

Bottle Size: 36*10*10cm

Total Height (with regulator): 46cm

With its fine tuning capabilities and electronic regulation, this CO2 Regulator meets the highest industry quality standard.

Just need to when using citric acid, baking soda, water in the bottle, can produce carbon dioxide, few minute later.Its like inflatablecylinders stable working pressure, for various reasons could not use the cylinder players, absolutely is the best choice in homemade co2equipment.

Operation method:

1. Remove the cover first, and then use the water bottles in the middle position of nabla cut, on top of the upper of the place can be asa funnel, pour 1 part baking soda (200 g).

2. and then continue to join citric acid (200 g).

3. Use cut open the bottle filled with water, just 300 g.Note: please do not add water first.

4. Use a clean cloth to clean bottle residue, quickly and then tighten the cover.

5. After waiting forfewminutes, let the bottle of raw material sufficient reaction (around slightly shaking the bottle)

6. Remove the power cord, electromagnetic valve socket connection, will the power electricity.

7. Rotary valve cover the above adjustment valve, test whether there is gas in the bottle

Good stiff connection pipe, adjust their required air output, normal use.

More information vist this video:

Matters needing attention

♥Bottle had better put some lubricant in thread, in order to easy to unscrew bonnet next time.

♥Tighten the coverno pressure too much, just twist to the pressure gauge is the sticker on the bottle.

♥The bottle upside down and shake up and down is forofferden, in order to avoid raw material to block air flow.

♥Bubble gauge there may be a leakage of the water transport, and need to unscrew stiff upper metal nut to add water.

Shipping:

We ship to worldwide, right to your doorstep.

Please allow 3-7 business days for shipping to be carried out after payment has been received. Delivery will normally take 2-12 business days by EMS, and 14-21 business days by China Post Air Mail.

Contact Us:

If you have any questions please feel freetoleave us a message. Wewill get back to you ASAP.

About response

We value our customers and we greatly appreciate your POSITIVE response. Please do NOT leave negative response without asking for help so that we may solve the problem.