500W LED Digital Aquarium Heater Anti-Explosion Submersible Fish Tank Adjustable For Sale -

500W LED Digital Aquarium Heater Anti-Explosion Submersible Fish Tank Adjustable

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

500W LED Digital Aquarium Heater Anti-Explosion Submersible Fish Tank Adjustable:
$33.89

500W LED Digital Aquarium Heater Anti-Explosion Submersible Fish Tank Adjustable100% New & high Quality
Strictly QC, Each item was fully Tested before shipping
Expedited Shipping delivery with Tracking Number
3 year warranty& 60 day free return500W Titanium Alloy TubeFeatures:
*Suitable for Fish Tank 250-350L-voltage 110V, power 500W, heater rod length 12.6inch/32cm. The controller power cord length 5.5ft/170cm.
*Very easy and reliable to use. After well installing the aquarium heater and the thermometer, you just need to set the desired heating temp, then it can ensure the temperature constant at the set point with the blue indicator light,as it can adjust heating power automatically if there is any water temperature variation.
*Made of Durable Titanium alloy Tube-Our seawater resistant titanium aquarium heater is good for use both in salt water and fresh water, long service life.
*Antiflaming heater cover can prevent fish from going too close to the heater.
*Very compact small size, easy to hide in the tank. Comes with 2 suction cups to keep the heater in place of tank.
*There is indicator light to show the heating status on the LED screen through the temperature control.
You can long-press the 'Set' key to shift degree unit between Celsius and Fahrenheit.
*ON/OFF switch and Adjustable temperature controller.
*Suitable Temperature to Set for fish -With the thermostat controller you can set the temp from 68℉to 94℉
*Double sensing probes on the top of heater provide more precise induction.


Warning Notes:
1.Please use the heater in the water,when it is exposed in the air,the after-heat may cause damage to the heater or finally make it broken.
2.After you have cut the power,please wait at least 20mins until you can put it out.
3.Do not use the heater in corrosive environment.
4.The heater can be set inside the tank vertically and horizontally,but please put all the heater inside the water.
5.It only starts heating when it has gone 2 degrees below the set temperature(For example,if you want to get to the 26-27℃ range,you should set at 28-29℃)

Error code and LED display:
-Blue light:The temp have reach the goal,now the heater will keep it.
-Red light:The heater is now heating.
-E1:Water shortage or wrong installation
-E2:The temp went over 94℉,the heater will now stop heating
-E6:The temp went over 96℉,the heater will now stop heating

Specifications:
Materials:Titanium alloy
Color:Black
Power:500W
Voltage:110V
Fits Fish tank size:100-120cm
Suits for Water Volume:250-350L
Heater length:32cm diameter:23mm
Power cord length:1.7m
Temperature control range:68℉-94℉/20-34℃
Waterproof level:IP68

Package includes:
1 x Aquarium Heater(with power cord & plug)
1 x User manual
2 x Suction Stainless Steel TubeFeatures:
*Suitable for Fish Tank 250-350L-voltage 110V, power 500W, heater rod length 12.6inch/32cm. The controller power cord length 5.5ft/170cm.
*Very easy and reliable to use. After well installing the aquarium heater and the thermometer, you just need to set the desired heating temp, then it can ensure the temperature constant at the set point with the blue indicator light,as it can adjust heating power automatically if there is any water temperature variation.
*Made of Durable Stainless steel Tube-Our seawater resistant steel aquarium heater is good for use both in salt water and fresh water, long service life.
*Antiflaming heater cover can prevent fish from going too close to the heater.
*Very compact small size, easy to hide in the tank. Comes with 2 suction cups to keep the heater in place of tank.
*There is indicator light to show the heating status on the LED screen through the temperature control.
You can long-press the 'Set' key to shift degree unit between Celsius and Fahrenheit.
*ON/OFF switch and Adjustable temperature controller.
*Suitable Temperature to Set for fish -With the thermostat controller you can set the temp from 68℉to 94℉
*Double sensing probes on the top of heater provide more precise induction.


Warning Notes:
1.Please use the heater in the water,when it is exposed in the air,the after-heat may cause damage to the heater or finally make it broken.
2.After you have cut the power,please wait at least 20mins until you can put it out.
3.Do not use the heater in corrosive environment.
4.The heater can be set inside the tank vertically and horizontally,but please put all the heater inside the water.
5.It only starts heating when it has gone 2 degrees below the set temperature(For example,if you want to get to the 26-27℃ range,you should set at 28-29℃)

Error code and LED display:
-Blue light:The temp have reach the goal,now the heater will keep it.
-Red light:The heater is now heating.
-E1:Water shortage or wrong installation
-E2:The temp went over 94℉,the heater will now stop heating
-E6:The temp went over 96℉,the heater will now stop heating

Specifications:
Materials:Stainless steel
Color:Silver
Power:500W
Voltage:110V
Fits Fish tank size:100-120cm
Suits for Water Volume:250-350L
Heater length:32cm diameter:23mm
Power cord length:1.7m
Temperature control range:68℉-94℉/20-34℃
Waterproof level:IP68

Package includes:
1 x Aquarium Heater(with power cord & plug)
1 x User manual
2 x Suction 400W Quartz TubeDescription:Quartz tube diameter: 23.8mm; Casing tube diameter: 33mm
Item Length:36.5cm
Cable length: 1.5m
Water Volume:100-200 liters
Power:400W
Voltage:110V
Frequency: 60HZ
Adjustable style="color: #333333; font-family: Arial; font-size: 12px;">
Operation instruction: The heater should be immersed into water completely. It takes about 10~15 minutes to get used to the water temperature. Then adjust and set the desired temperature value 68℉-94℉. It starts to work if the actual temperature value is lower than the set value, unless it doesn't work.

Features:
a. Quartz glass of 2.0mm thickness, super shatterproof
b. Fully sealed, completely submersible and water-proof
c. Accurate temperature setting


Package includes:
1 x Mini HeaterFeatures:
*Suitable for Fish Tank 200L-voltage 110V, power 200W.
*External temperature control,more safe and convenient to use.
*Auto Thermostat-After well installing the aquarium heater and the thermometer, you just need to set the desired heating temp, then it can ensure the temperature constant at the set point with the indicator light,as it can adjust heating power automatically if there is any water temperature variation.
*Made of made of explosion-proof shatterproof shield-proof quartz glass and protective sleeve, with high heat transfer efficiency performance, high temperature resistant flame retardant, fast heat transfer and long service life.
*Very compact small size, easy to hide in the tank. Comes with 2 suction cups to keep the heater in place of tank.
*Can be used both in salt water and fresh water, long service life.
*There are LED indicators to show the heating status on the LED display through the external temperature control,which is easy know and reading the temp. You can long-press the 'Set' key to shift degree unit between Celsius and Fahrenheit.
*ON/OFF switch and Adjustable temperature controller.
*Digital accurate temperature control -With the thermostat controller you can set the temp from 68℉to 94℉



Warning Notes:
1.Please use the heater in the water,when it is exposed in the air,the after-heat may cause damage to the heater or finally make it broken.
2.After you have cut the power,please wait at least 30mins until you can put it out.
3.Do not use the heater in corrosive environment.
4.The heater can be set inside the tank vertically and horizontally,but please put all the heater inside the water.


Error code and LED display:
-Blue light:The temp have reach the goal,now the heater will keep it.
-Red light:The heater is now heating.
-E1:Water shortage or wrong installation
-E2:The temp went over 94℉,the heater will now stop heating
-E6:The temp went over 96℉,the heater will now stop heating

Specifications:
Main Material: Durable quartz glass and Plastic
Color:Black
Power:200W
Voltage:110V
Fits Fish tank size: 50-80cm
Suits for Water Volume:200L
Heater dimension:12.5*6.5*3cm
Power cord length:1.7m
Temperature control range:68℉-94℉/20-34℃
Waterproof level:IP68

Package includes:
1 x Mini Aquarium Heater(with power cord & plug & Suction cups*2)
1 x User manualresponseDelivery detailsTerms of salesAbout usContact usresponse

Contact us if you have any question, Give us a chance to serve you,No negative response, it will not solve the problem! Thanks!

communication Please!

Delivery details

Fast Shipping from NJ-USA

Terms of sales
About us



Contact usWelcome ! Pls email us by clicking contact the buyer or ask a question.

On Dec 15, 2022 at 19:26:10 PST, seller added the following information:


Buy Now


Related items