35mm FFP 3-30x56 first focal plane rifle scope military sniper precise shooting For Sale -

35mm Telescopic optical sights utg 3-30x56 discovery first focal plane rifle scipe military sniper gun scope hunting riflescope Item Description: This 3-30x56 Scope is (Front) First Focal Plane Reticle

It is 100% Waterproof and Fogproof,it has very wide field of view,it\'s a 10 times ratio rifle scope,can be used in all kinds of Hunting. It\'s fully multi-coated optics 35mm tube delivers superior brightness and outstanding repeatable accuracy with the largest long-range weapons, including those chambered for the .338 Lapua.

• Revolutionary10times ratio rifle scope.
• Super thin mil-DOT reticle
• Nitrogen filling to prevent fogging on the inner lens surfaces.
• Its super good optical system provide extreme good performance in all kinds of conditions.
• You can see your target clearly and shootaccurately.
• Perfect on heavy,hard-hitting,large caliber riflesused for extended ranges,such as the50 BMG and 338 lapua magnum.
• It provide you with higly brightness,extraodinary clarity, absolutely accuracy, outstanding water\\ fog\\shock-proof features.
• Our riflescope wil assist you in enjoying yourhunting \\target shooting\\ tacticalshooting.
• Extral wide field of view.
• Light weight and small size, very easy for carrying.
• long-range performer built on a 35 mm tube for addedstrength,brightness and clarity and can meet the demands of extreme situations.
  

Specification

Specification:

Magnification: 3x-30x

Objective lens: 56mm

Coating: FMC Green

Field of View: 31.5-3.15FT@100YARDS

Exit Pupil (mm): 14.5-1.86mm

Eye Relief (inch): 4.7\"-3.8\"

Lenses Number: 14

Finish: Matte black

Waterproof: Yes

Battery: CR2032 3V(No include)

Nitrogen: Full filled Nitrogen

Tube Diameter: 35MM

Click Value: 1/8\"MOA

Parallax: 10yards - infinite

Reticle: Glass-etched Mil-dot

Weight: 1000g

Length: 390mm

Shockresistant: 3000Gs\'

Windage Adjustment Range(in.): 50

Elevation Adjustment Range(in.): 50

Features:

- 3x-30x provide 3 times to 30 times magnification,it is a 10 time ratio zoom rifle scope, can be used in all kinds of hunting/target shooting. Both short distance and long distance can be used.

-Supply from professional optical brand \"SECOZOOM\" directly,buy for confidence.

- The” Fully Multi-Coated” camera quality crystal lenses for superior brightness, clarity, and contrast in all light conditions.

- The 35mm main tube and illuminated Red/Green offer the clearest view for easy target acquisition in both bright and low light situations.

- Nitrogen filling to prevent fogging on the inner lens surfaces.

- ⊃1;⁄8-minute click adjustments for windage and elevation.

- The parallax adjustment is moved to the rear of the scope for quick and easy operation. Focus range of 10 meters to infinity.

- Super high shock resistant,suitable for all calibres from Air Rifle .22 to .338.

- Reticle focus is achieved via the fast focus ocular adjustment.

- Attractive matte black finish.

- A pair of durables secozoomScope Cover is included to protect your valuable 1x-10x riflescope during transport or when not in use.

- Forged & milled T6061 aircraft aluminum bodies,One piece tube body for superior ruggedness.

- Impact resistance to more than 3000 times the force of gravity.

- Proprietary -230 - +485°F stable pure optical glass

- Lenses of optically flawless transmissivity, composited to aspheric lens elements to eliminate chromatic aberrations with apochromatic lense with extra low dispersion glass.

- Vaccum and lifetime pressurizing with a mixture of nitrogen and rare earth gasses fogging or hazing from -51*F - 212*F.

- Vaporless, fogless, mirageless- unaffected by atmospheric ranges from below sea level to 5 miles above it.

- Mil spec waterproof for marine-ops, dustproof for desert warfare & ergonomically compatible with arctic gloves or desert heat.

- CE FCC RoHs Certified

Service we provide:

1. Professional designer and manufacturer of riflescopes, telescopic sight

2. High quality, optical system and mechanism design at reasonable and competitive price

3. Any inquiries will be replied within 10hours

4. OEM/ODM service:

a) Customized rifle opticsappearance

b) Customized color box or gift box

c) Engraving you logo or label on products

d) We help to design your ideas and put it into production

Quality Guarantee

5Years Quality Warranty:

Except man-made mistakes, we will exchange the defective with a brand new one within 7 days after youget our product.

According to the guild regulations customer shall be responsible for the returning shipping fee.

All scopes from us havefiveyears warranty.

Detailed Images

UnretouchedPhotos:

FAQ

FAQ

-What\'s focal plane is the reticle?

It\'s the First Front Focal Plane Reticle for 3-30x56 Rifle Scope for Hunting.

-What\'s the difference between 1stand 2ndfocal plane reticle?

Most riflescopes utilize a rear focal plane reticle design, creating a situation where the apparent size of the reticle does not change as the magnification is adjusted. In these scopes, the amount of target area covered by the reticle is inversely proportional to magnification; as the magnification is increased, the amount of target area covered by the reticle is decreased. This can be seen by looking through a variable magnification scope and increasing the magnification setting. As the power is increased, the apparent size of the target is increased, but the reticle appears to remain the same size; the result is that the reticle covers less of the target when the magnification is increased.

1.If waterproof riflescope can get access to water or not?

The riflescopes from us can keep working perfectly under water. However, please note the fact that in order to lengthen the working life, please dry it with lens cloth and put in moisture-free and dry environment after getting wet.

Don’t put in humid environment for a long time. Keep Dry with desiccant.

2.Use Scope Mounts Correctly

If the scope is always clipped very tightly, it may cause scope tube deformation. You don’t need to clip the mounting rings too tightly, you may check if the optics move away after ten fire. If displacement, make adjustment accordingly.

After each shooting, loosen the screw of the mounts to let scope relax so as to minimize the stress of the scope. The scope will only be stressed while in use.

When you put away your rifles, don’t leave the rifles pressing on riflescopes, because the heavy weight of the rifles will probably cause damage to the mounts or the scopes. Don’t leave other items pressing on the scopes neither especially the rifles and lenses will got pressed or cause screw loosed in transit by shock and bump.

3.Installation of Mounts

When you find the windage and elevation turrets have reached the maxi limit but the deviation of bullet is big, please check your mounting rings to make sure the scope is in the middle of the mounting rings without no lateral force that cause unparallel of axle wire of the scope and the rifle. Showed in the picture below, the lateral force may cause the unparallel of the central point of the mounting rings and the central point of the scopes and cause impact error.

Correct Installation:

Incorrect Installation as below:

4.How to observe the parallax?

Parallax is a condition that occurs when the image of the target is not focused precisely by misalignment of shooters eye on the reticle plane. This condition exists in all scopes. Parallax is visible as an apparent movement between the crosshairs and the target when a shooter moves their head and changes eye alignment in the scope.

The higher the magnification the more visible this is.

Without touching the rifle, move your eye around behind the scope. If the crosshairs appear to move on the target, the parallax is not set for the range of the target you are using.

SECOZOOM scopes equipped with an adjustable parallax knob can correct this at all yardages.

This side parallax knob is located opposite the windage knob on the other side of the scope for models with adjustable parallax. The parallax will be fixed at 100 yards.

If your crosshairs move to the right on the target’s image when you move your head to the left, the image place must be further away than the crosshairs. To pull the image plane in, screw the objective bell in (counter clockwise) so that the objective moves closer to you.

In this set up, the image is essentially tied to the objective so moving the objective 0.1mm moves the image 0.1mm. Adjust outward to pull back.

5.If there is parallax, what can we do?

Adjust the scale marks of side focus knob identical to the sighting range, for example, if your target is in 200 yards far away, adjust your side focus to 200 yards.

6.The relation between the parallax and the eye relief?

There is no direct relation between the the parallax and the eye relief.

Actually, even if you put your eyes within the eye relief, there may still be parallax.

Because the parallax is caused by the relation between objective lens and crosshair whereas eye relief is the relation between the eye and eyepiece.

A zero parallax riflescope has no parallax at all yardages no matter within eye relief or not and no matter there is lateral deviation or not.

---