24" X 48" 55 Watt Laser Cutter / Engraver Emissions Technologies ETK-XY, CNC. For Sale -
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
24" X 48" 55 Watt Laser Cutter / Engraver Emissions Technologies ETK-XY, CNC.:
$7999.00
Toolbox, Compressor and White Bench are not included.
Emissions Technologies 55 watt ETK-XY, CNC laser cutter / engraver for sale.This has been the most reliable tool I have ever owned short of perhaps a screwdriver.The design is very robust, simple, efficient and has no wear on it at all.This is one of Emission Technologies first Stainless table XY kits and is in beautiful condition.This kit is no longer produced and the new kits start at $19,995 with a 3 month wait for production and then shipping from Florida.24" Y axis by 48" X axis usable working area is one of the largest tables in its class.It also has a vacuum table to remove fumes and hold down most flat work.When new these require that you supply an operating computer with true DOS (WIN 95 or Win 98). A very durable Toshiba laptop that I have used since 2005 for this running WIN 95 is included.Also included is a much newer desktop computer with monitor that the unit is currently running on with Windows 98 to boot into Win 98 or True DOS.
You have to supply a computer with a CAD program capable of producing *.dxf files that are converted by the included software to *.Dnc files to run on the controller. The process is very easily mastered and from a completed drawing to cutting or engraving can be less than 5 minutes away.You will also have to supply your own compressor for the air assist cutting nozzle.It is recommended you have a separate 20 amp 110-115 volt circuit available for the unit and computer power requirements.
The machine was used to produce about 500 Depron foam radio control aircraft kits by cutting the foam, plywood and lexan sheet parts to be assembled. It can cut 1/8" plywood, or other materials, to such a high level of precision that a tab and slot design can be assembled without any adhesive, be perfectly aligned and joints glued as a whole unit. I have a 1/8" plywood fuel tank mount made for a 50cc aircraft in 2006, that is still together today with no adhesive at all.
I only use the machine only about 2 times a year now since 2006 for some wood engraving and leather cutting and engraving It needs to go to a home where it will get used and enjoyed. I will miss it but it has to go. Watch it run and cut and/or engrave something on YouTube before you buy it.
Installation, Setup help and initial use training will be provided as needed. I will show you everything. I have moved the unit twice now. It is very easy to do and you could have a running, producing system within minuets of full install at your location.
Here is a short video of the Laser etching a rock. Due to policy you will have to fill in the blanks to get to YouTube which I find ridiculous but.......youtube /watch?v=ikF-iO71084And here is a short video of it making a leather key fob.youtube /watch?v=jVDEqyPcbZg
There are many other things the laser is capable of doing. It's really only limited by your imagination. Etch Glass, Etch Mirrors in reverse on the coated side. Cut wood, leather, cloth, foam, any organic material.
Scammers are rampant out there. If you want to scam me I will turn you in to the authorities and prosecute to the fullest extent of the law.If you ask me in an email reply, "What's your lowest price?" or words to that effect, just double what's listed because I'll know you are just a scammer.If you have a serious interest and are a genuine person, I want to hear from you.
$7999.00 price is "As Is Where Is" or FOB. Crating and shipping will be additional and charged at actual cost. Figure around 400 to 600 for many trucking outfits for across country. Local pickup and or delivery is free. Ad says Local pickup only but shipping or delivery can be negotiated.
Related items
Emissions Technologies 55 watt ETK-XY, CNC laser cutter / engraver for sale.This has been the most reliable tool I have ever owned short of perhaps a screwdriver.The design is very robust, simple, efficient and has no wear on it at all.This is one of Emission Technologies first Stainless table XY kits and is in beautiful condition.This kit is no longer produced and the new kits start at $19,995 with a 3 month wait for production and then shipping from Florida.24" Y axis by 48" X axis usable working area is one of the largest tables in its class.It also has a vacuum table to remove fumes and hold down most flat work.When new these require that you supply an operating computer with true DOS (WIN 95 or Win 98). A very durable Toshiba laptop that I have used since 2005 for this running WIN 95 is included.Also included is a much newer desktop computer with monitor that the unit is currently running on with Windows 98 to boot into Win 98 or True DOS.
You have to supply a computer with a CAD program capable of producing *.dxf files that are converted by the included software to *.Dnc files to run on the controller. The process is very easily mastered and from a completed drawing to cutting or engraving can be less than 5 minutes away.You will also have to supply your own compressor for the air assist cutting nozzle.It is recommended you have a separate 20 amp 110-115 volt circuit available for the unit and computer power requirements.
The machine was used to produce about 500 Depron foam radio control aircraft kits by cutting the foam, plywood and lexan sheet parts to be assembled. It can cut 1/8" plywood, or other materials, to such a high level of precision that a tab and slot design can be assembled without any adhesive, be perfectly aligned and joints glued as a whole unit. I have a 1/8" plywood fuel tank mount made for a 50cc aircraft in 2006, that is still together today with no adhesive at all.
I only use the machine only about 2 times a year now since 2006 for some wood engraving and leather cutting and engraving It needs to go to a home where it will get used and enjoyed. I will miss it but it has to go. Watch it run and cut and/or engrave something on YouTube before you buy it.
Installation, Setup help and initial use training will be provided as needed. I will show you everything. I have moved the unit twice now. It is very easy to do and you could have a running, producing system within minuets of full install at your location.
Here is a short video of the Laser etching a rock. Due to policy you will have to fill in the blanks to get to YouTube which I find ridiculous but.......youtube /watch?v=ikF-iO71084And here is a short video of it making a leather key fob.youtube /watch?v=jVDEqyPcbZg
There are many other things the laser is capable of doing. It's really only limited by your imagination. Etch Glass, Etch Mirrors in reverse on the coated side. Cut wood, leather, cloth, foam, any organic material.
Scammers are rampant out there. If you want to scam me I will turn you in to the authorities and prosecute to the fullest extent of the law.If you ask me in an email reply, "What's your lowest price?" or words to that effect, just double what's listed because I'll know you are just a scammer.If you have a serious interest and are a genuine person, I want to hear from you.
$7999.00 price is "As Is Where Is" or FOB. Crating and shipping will be additional and charged at actual cost. Figure around 400 to 600 for many trucking outfits for across country. Local pickup and or delivery is free. Ad says Local pickup only but shipping or delivery can be negotiated.