19\' Diamond Triple gang side arm tractor mount flail mower Tiger Alamo hydraulic For Sale -
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
19\' Diamond Triple gang side arm tractor mount flail mower Tiger Alamo hydraulic:
$20000.00
Triple gang heavy dutyDiamond flail mower for sale. Two side mount units, both are hydraulically driven 75\" wide. One rear mount is PTO driven, 102\" wide. Total 19\' cutting width. Unit has complete mounting frame, hydraulic tank, pump, and controls. This unit has been refurbished to new condition for a municipality, who didn\'t need it. Original cost over $45,000. This unit is ready to be installed on your tractor. Call 256threethreefivetwo83seven with any questions. Feel free to make an offer.
This unit was removed from a 6330 John Deere. The tractor had under 400 hours when the unit was removed. I will be glad to assist with, or arrange shipping, and will crate/load onto a truckfor free. Buyer to pay shipping cost only.Shipping available for $2.00 permileBelow are the manufacturer specs from Diamond current model mower, should be very close to the same as this unit:
Rear-Mounted Flail Mower Specifications:Cutter Assembly― Hydraulically Driven 2,400 RPM― PTO Driven― Cutter Head 3/16\" bonnet,1/2\" drive side, 1/2\" carrier side― 102\" Cutter Head has108 self-cleaning, heat-treated, reversible knives, or 54 heat-treated suction knives― Roller is 1 3/8\" grease-type with double row and steel bearings― Cutter Shaft bearing guards are standard― Knife Swing Circumference - 58 1/2\"― Skid shoes are replaceableHydraulics― Pump is gear-type with cast steel housing rated at 98 HPTransmission Drive― Motor is gear-type with cast steel housing rated at 74 HP― 65 HP Drive Shaft― Reservoir - 65 gallons― 90 HP Constant― Filter - located in reservoir, 75 GPM rated with 25 micron element with restriction gauge― 135 HP intermittent rated gear box― Hoses are high pressure, drive and return - 1\" I.D― 81 HP belt system― Lift Controls are two, single acting hydraulic cylinders with a built-in float― Self adjusting― Main Control Valve is electric solenoid operated, non-restrictive, with a starter lock-out switch Main FrameSolid mounted front-, mid-, and rear-braced
19\' Triple Gang Flail // 102\" rear // 75\" right side // 75\" left side // 252\" total
Rear flail rated at 1500lbs and cut up to 2” material
This unit was removed from a 6330 John Deere. The tractor had under 400 hours when the unit was removed. I will be glad to assist with, or arrange shipping, and will crate/load onto a truckfor free. Buyer to pay shipping cost only.Shipping available for $2.00 permileBelow are the manufacturer specs from Diamond current model mower, should be very close to the same as this unit:
Rear-Mounted Flail Mower Specifications:Cutter Assembly― Hydraulically Driven 2,400 RPM― PTO Driven― Cutter Head 3/16\" bonnet,1/2\" drive side, 1/2\" carrier side― 102\" Cutter Head has108 self-cleaning, heat-treated, reversible knives, or 54 heat-treated suction knives― Roller is 1 3/8\" grease-type with double row and steel bearings― Cutter Shaft bearing guards are standard― Knife Swing Circumference - 58 1/2\"― Skid shoes are replaceableHydraulics― Pump is gear-type with cast steel housing rated at 98 HPTransmission Drive― Motor is gear-type with cast steel housing rated at 74 HP― 65 HP Drive Shaft― Reservoir - 65 gallons― 90 HP Constant― Filter - located in reservoir, 75 GPM rated with 25 micron element with restriction gauge― 135 HP intermittent rated gear box― Hoses are high pressure, drive and return - 1\" I.D― 81 HP belt system― Lift Controls are two, single acting hydraulic cylinders with a built-in float― Self adjusting― Main Control Valve is electric solenoid operated, non-restrictive, with a starter lock-out switch Main FrameSolid mounted front-, mid-, and rear-braced
19\' Triple Gang Flail // 102\" rear // 75\" right side // 75\" left side // 252\" total
Rear flail rated at 1500lbs and cut up to 2” material
Related items